Our 3 person hot tub has been developed to deliver the same quality of hydromassage that a larger hot tub delivers yet with much smaller dimensions making the Mercury ideal for installation in indoor or outdoor environments where space is limited.

For a true spa experience our Mercury 3 person Hot Tub features ine hdro seat amd two hydro lounge seats which allows you to lay back with a loved one and fully immerse your bodies into the water for a completely relaxing experience whilst the jets deliver an all over body hydromassage. .

Main Specifications

Certification	TÜV ETL SAA C-TICK
Dimensions (L x W x H)	2180 x 1680 x 940 mm
Seating Capacity	3 Adults
Lounge Seats	Double Lounge
Water Capacity	700 Litres
Dry Weight	275 kg
Spa Shell	ARISTECH Acrylics
Shell Colours	9
Structural Frame	Corrosion Free Steel Frame
Insulation	Heat Retention Foam
Cabinet	Timeproof PS Cabinet
Cabinet Colours	5
Control System	1 x Gecko control system
Heater	1 x 3 kW
Circulation Pump	1 x 0.35 HP/0.26 kW
Hydro Massage pump	1 x 2 HP/1.5 kW 1 x 3 HP/2.2 kW
Stainless Steel Water Jets	52
Lighting System	1 x Large Underwater Light
Ozone System	1 x 60 mg
Drain Valves	1
Intake Valves	2
Easy-Flo Air Control Valves	3
Headrests	2
Filtration System	1 x Cartridge Filter

Mercury - 3 Person Hot Tub

Name: Mercury - 3 Person Hot Tub
SKU: MERPENSPA2020

SKU: MERPENSPA2020

£6,199.00

Quantity

Here at Penguin Hot Tubs, we take pride in providing the best possible Customer Service. Our award-winning team is on-hand to help you with any technical enquires that you may have, no matter how small, regarding any of the products within our range.
All our hot tubs are delivered and installed FREE across the UK by our team of BISHTA qualified field technicians. The whole process will take between 4-6 hours, depending on your water pressure and any special requirements.

Positioning of the hot tub

Our technicians will position the hot tub in the location using our special adapted equipment. Should your delivery require special equipment such as a crane or Hiab, it is your responsibility to organise these to be on site in time for delivery, the service provider will lift and position your hot tub.

Electrical Supply

Once positioned your hot tub will then be connected to your electrical supply, it is imperative that your electric supply has been tested prior to installation to ensure it is working, and that enough cable has been left from the isolator to reach the furthest point of your hot tub.

Filling & Training

Once connected to the electrical supply, your hot tub will be filled with water and commissioned, the hot tub is then drained and re-filled. Once commissioned you will be provided a comprehensive training lesson how to use your hot tub, the features and the chemicals required and how to use them to maintain your water.